The winter season is here, and that means that you will be using more hot water than you were used to. From bathing to washing, hot water will be vital to tackling the cold. If your water heater is set too low, you won’t achieve the heat you require, especially in the shower. A high-temperature setting, on the other hand, exposes you to the risk of burns and could also damage your pipes and fixtures. So setting the right temperature is vital to avoid both extremes. Here is all you need to know about the right water heater temperature.
Factors Affecting Hot Water Heater Settings
Household Size
The water demand should be lower if you live alone. Because of this, the majority of single inhabitants would presumably use a lower temperature to save energy. In a residential home or apartment, a person can typically use 20–35 gallons per day. Due to a larger demand for hot water, a large household could choose an increased hot water temperature.
Pipe Size
Low flow rates and low pressure are correlated with smaller internal pipe diameters. Hot water will take a long time to get to your faucets if your piping system has small bores. As a result, heat will disperse as it travels. If your home is larger, you might want to think about adding a hot water recirculating system to speed up the delivery of hot water to the plumbing.
Non-Preheat Dishwashers
The preheating mechanism found in the majority of contemporary dishwashers nowadays elevates the water’s temperature as it enters the appliance. If the dishwasher does not pre-heat the water, raising the temperature on the water heater to around 140 degrees Fahrenheit will achieve the appropriate sanitizing level.
Energy Saving Tips for Hot Water Heaters
Insulate Water Tanks and Decrease Hot Water Usage
Energy use may increase due to a lack of insulation. It will be easy for the water heater to cool if the tank is not insulated. As a result, turning the cold water that comes in into hot water takes a long time, especially in very cold weather.
Assess and Repair Leaking Valves
High water pressure is frequently the reason for leaks. Given that it could harm the water heater, you shouldn’t ignore this problem.
Reduce the Thermostat Temperature
For every 10 degrees you lower the temperature, you may expect to save between $12 and $30 each year. According to the department of energy.
So What is the Right Temperature for Your Hot Water Heater?
A hot water temperature of around 120 degrees Fahrenheit would be sufficient to ward off illnesses while providing steamy hot showers. Additionally, it will lower total energy and power usage. The typical water heater’s maximum temperature is 150 degrees, but to prevent scalding, homeowners should set the temperature to 120 degrees.
Knowing and setting the right temperature is the difference between enjoying hot water usage and risking potential injuries such as scars and burns. To ensure your water heater is at the right temperature, always check the manufacturer’s instruction guide. For all your plumbing issues, visit us at Fixxer Company Plumbing. Contact us(contact us) today for more information.